Previous Up Next

35  The T.O.V.A. Flash Drive and CD

The T.O.V.A. comes with a brushed metal T.O.V.A. flash drive, though your T.O.V.A. may have come with the older white flash drive. This flash drive contains installers for the T.O.V.A. software that came with your T.O.V.A. System, as well as documentation such as the Installation Guide and User’s Manual. The flash drive can also be used on some computers to boot the Precision Test Environment (PTE). If you do not have a T.O.V.A. flash drive and need one, please contact T.O.V.A. customer service.

The T.O.V.A. CD came with older versions of the T.O.V.A. , serving the same function as the T.O.V.A. flash drive. It can be updated to act as a boot CD for the legacy PTE, but this is only useful on computers old enough to still a) have a CD drive and b) support the legacy PTE. If you need to boot the PTE from a T.O.V.A. CD but don’t have one, you can create one from a blank CD-R instead (section 35.3).

35.1  Using the T.O.V.A. flash drive or CD

Most computers should be able to boot the T.O.V.A. PTE automatically and won’t need a T.O.V.A. flash drive or CD. However, many computers will need to use the T.O.V.A. flash drive included with your T.O.V.A. System, and they will likely require some additional steps or configuration as well. If the T.O.V.A. doesn’t boot the PTE automatically, please contact T.O.V.A. tech support, and we’ll help you find the best approach for your computer. You may also reach out to your organization’s IT department or ask your computer’s manufacturer how to boot to a flash drive.

Your T.O.V.A. flash drive or CD also contains software installers and documentation, but we recommend you download the latest software for your T.O.V.A. hardware from our website instead: Go to https://www.tovatest.com/downloads and enter your T.O.V.A. serial number (found on a sticker on the bottom of your T.O.V.A. USB device or in the Help window of the T.O.V.A. application).

35.2  Updating (or Creating) a T.O.V.A. Flash Drive

It is critical that the T.O.V.A. PTE remain up to date, with a version of the PTE that is compatible with your computer and the T.O.V.A. software. If you are using the T.O.V.A. flash drive to boot the PTE, and the T.O.V.A. application warns you that your PTE is out-of-date, you will need to update the flash drive.

Note: If you use a T.O.V.A. CD to boot the PTE, please see section 35.3 instead.

35.2.1  On Windows

If you have a white T.O.V.A. flash drive, which comes up as tova8 or TOVA9, you will probably need to contact T.O.V.A. technical support to update or replace it. Note: It’s not as simple as just reformatting the drive.

If the drive has a brushed metal finish or shows a drive label of TOVATEST, it’s probably a newer T.O.V.A. flash drive, and the T.O.V.A. software should automatically update the flash drive for you. Make sure it’s plugged in when you launch a PTE session.

35.2.2  On Mac

Note: If you have personal files on the T.O.V.A. flash drive, PLEASE copy them elsewhere before updating the drive.

If you are using a Mac, the T.O.V.A. software installs scripts for creating or updating T.O.V.A. flash drives to boot the current PTE versions.

  1. Plug in the T.O.V.A. flash drive. (For safety, this script will only work for USB Flash drives or SD cards labeled ‘tova8’, ‘TOVA9’, or ‘TOVATEST’. You can use any 500 MB or larger flash drive, but you will need to first change the drive label.)
  2. Go to /Applications/TOVA/utilities or use Spotlight to find the Update_Flash_Drive.command script, and open it.
  3. A Terminal window will open and build the T.O.V.A. flash drive. This will take several minutes.
  4. If there is an error message, you should copy it and send it to us in a Tech Support Request. Otherwise, you can close the Terminal when the script says, “Finished!".

When it has finished, you can use the T.O.V.A. flash drive to boot the current PTE. Please contact T.O.V.A. tech support (section 29) if you would like help or encounter problems.

35.3  Updating (or Creating) a T.O.V.A. CD

Keep your T.O.V.A. CD up to date

If you are using a T.O.V.A. CD, you may need to update it when you update the T.O.V.A. software, so that you’re using the current version of the legacy PTE. The T.O.V.A. CD itself was a CD-RW and can be updated by most CD-RW drives and CD creation software. If you do not have the T.O.V.A. CD, you can write the T.O.V.A. CD image to any blank CD-R ("burning" just means writing data to a CD).

35.3.1  ‘Update_CD’ script for Macs

The T.O.V.A. has a script for burning the current CD image:

  1. Insert the T.O.V.A. CD or another writeable CD.
  2. Go to /Applications/TOVA/utilities or use Spotlight to find the ‘Update_CD.command’ script, and open it.
  3. A Terminal window will open, which will burn the current T.O.V.A. CD image onto the CD you put in the drive. This will take a few minutes, and the disk will eject when the process is complete.
  4. If there is an error message, please copy it and send it to us in a Tech support request (section 29. Otherwise, close the Terminal when the CD ejects.

When it has finished, your CD is up to date, and you can use the CD to boot the current legacy PTE.

35.3.2  Burning a Boot CD under Windows

Here’s how to burn a CD to boot the legacy PTE in Windows:

Configuring your computer to use the T.O.V.A. CD
  1. Insert the T.O.V.A. CD (which is a CD-RW) or another writeable CD. If any Autorun window pops up, close it.
  2. Run the T.O.V.A. application.
  3. At the bottom of the main T.O.V.A. window, choose ‘Preferences’.
  4. Under Session launch, make sure that you are configured for ‘Precision Test Environment (PTE)’ and ‘Use boot CD’ (Figure 77). (That’s the only reason to create or update a T.O.V.A. CD.)
  5. Next to Use boot CD, click ‘Create/Update’.
  6. When prompted to insert the CD, click ‘OK’.
  7. If this is a T.O.V.A. CD, you will be asked if you want to erase the disc (Figure 78). Choose ‘Yes’.
  8. After the disc has finished burning, click ‘Close’.
  9. Back in the T.O.V.A. Preferences window, click ‘Save’ if you changed any settings.
Erase warning—choose ‘Yes’

The burning process should take only a few minutes. When it’s done, you’ll have a fresh new T.O.V.A. CD with the current legacy PTE. If you encounter problems burning the CD, try wiping it clean with a tissue or using a different CD-R.


Previous Up Next